© Copyright Lenovo 2017
Table 48.
OSPFv3 Information Options (continued)
Command Syntax and Usage
show ipv6 ospf interface [<interface number>]
Displays interface information for a particular interface. If no parameter is
supplied, it displays information for all the interfaces. To view a sample
display, see page
110.
Command mode: All
show ipv6 ospf neighbor [<nbr router‐ID (IP address)>]
Displays the status of a neighbor with a particular router ID. If no router ID is
supplied, it displays the information about all the current neighbors.
Command mode: All
show ipv6 ospf redistconfig <1‐128>
Displays the current OSPFv3 redistribution configuration for the specified
entry.
Command mode: All
show ipv6 ospf redistconfig information
Displays OSPFv3 redistribution information to be applied to routes learned
from the route table.
Command mode: All
show ipv6 ospf requestlist [<nbr router‐ID (IP address)>]
Displays the OSPFv3 request list. If no router ID is supplied, it displays the
information about all the current neighbors.
Command mode: All
show ipv6 ospf retranslist [<nbr router‐ID (IP address)>]
Displays the OSPFv3 retransmission list. If no router ID is supplied, it displays
the information about all the current neighbors.
Command mode: All
show ipv6 ospf routes
Displays OSPFv3 routing table. To view a sample display, see page
Command mode: All
show ipv6 ospf summaryprefix <1‐16>
Displays the current OSPFv3 AS‐external range.
Command mode: All
show ipv6 ospf summaryprefix information
Displays the OSPFv3 external summary‐address configuration information.
Command mode: All
112.
Chapter 2: Information Commands
109