Ufp Information - Lenovo RackSwitch G8264 Command Reference Manual

UFP Information
© Copyright Lenovo 2017
The following commands display information about Unified Fabric Port (UFP)
settings.
Table 77.
UFP Information Options
Command Syntax and Usage
show ufp information cdcp [port <port alias or number>]
Displays S‐Channel Discovery and Configuration Protocol (CDCP)
information. CDCP allows hypervisor hosts to create on‐demand S‐channels
with the switch. For details, see page
Command mode: All
show ufp information getvlan <VLAN ID (2‐4094)>
Displays state, operating mode and VLAN related information for physical
and virtual ports associated to a specified VLAN ID.
Command mode: All
show ufp information port [<port alias or number>]
Displays UFP status for all physical ports or only for a specified physical port.
Information includes wether the UFP is enabled on the physical port, how
many virtual ports are enabled and the link stats for each virtual port. For
details, see page 187.
Command mode: All
show ufp information qos [port <port alias or number> [vport <1‐8>]]
Displays UFP Quality of Service (QoS) information, such as bandwidth
allocation, Qos mode, priority, or host Class of Service (COS) control. For
details, see page 188.
Command mode: All
show ufp information tlvstat [port <port alias or number>]
Displays status for Type‐Length‐Values transmitted on UFP‐enabled

physical ports. For details, see page
Command mode: All
show ufp information vlan [<VLAN ID (1‐4094)>]
Displays ports and virtual ports associated to all configured VLANs or to a
specified VLAN ID. For details, see page
Command mode: All
show ufp information vport [port <port alias or number> [vport
<1‐8>]]
Displays state, operating mode and VLAN related information for all virtual
ports, for virtual ports belonging to a specified physical port or for a single
virtual port. For details, see page
Command mode: All
187.
189.
191.
190.
Chapter 2: Information Commands
185