User Access Control Configuration - Lenovo RackSwitch G8264 Command Reference Manual

User Access Control Configuration

390
G8264 Command Reference for ENOS 8.4
The following table describes user‐access control commands.
Note: Passwords can be a maximum of 64 characters.
Table 171.
User Access Control Configuration Options
Command Syntax and Usage
access user <1‐20>
Configures the User ID. For more command options, see page
Command mode: Global configuration
[no] access user administrator­enable
Enables or disables the default administrator account.
Command mode: Global configuration
access user administrator­password
Sets the administrator (admin) password. The administrator has complete
access to all menus, information and configuration commands on the G8264,
including the ability to change both the user and administrator passwords.
This command will prompt for required information: current admin password,
new password (up to 64 characters) and confirmation of the new password.
Access includes "oper" functions.
Note: You cannot disable the administrator password.
Command Mode: Global configuration
access user eject {<user name>|session­id <session ID>}
Ejects the specified user from the G8264.
Command mode: Global configuration
access user operator­password
Sets the operator (oper)password. The operator manages all functions of the
switch. The operator can view all switch information and statistics and can
reset ports.
This command will prompt for required information: current admin password,
new password (up to 64 characters) and confirmation of the new password.
Note: To disable the operator account, set the password to null (no password).
The default setting is disabled (no password).
Command Mode: Global configuration
access user user­password
Sets the user (user) password. The user has no direct responsibility for switch
management. The user view switch status information and statistics, but cannot
make any configuration changes.
This command will prompt for required information: current admin password,
new password (up to 64 characters) and confirmation of the new password.
Note: To disable the user account, set the password to null (no password).
Command Mode: Global configuration
391.