Lenovo RackSwitch G8264 Command Reference Manual page 289

OpenFlow Statistics
© Copyright Lenovo 2017
The following commands display OpenFlow statistics:
Table 132.
OpenFlow Statistics Commands
Command Syntax and Usage
show openflow statistics
Displays OpenFlow traffic statistics for each OpenFlow instance.
Command mode: All
show openflow instance <1‐2> statistics
Displays OpenFlow traffic statistics for the specified instance ID.
Command mode: All
clear openflow statistics
Clears OpenFlow data for all instances.
Command mode: Privileged EXEC
clear openflow instance <1‐2> statistics
Clears OpenFlow data for the specified instance ID.
Command mode: Privileged EXEC
Use the following command to display OpenFlow traffic statistics for each
OpenFlow instance:
show openflow statistics
Command mode: All
In OpenFlow 1.0:
Openflow instance 1 is currently disabled
­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­
Openflow statistics for instance 2
Flow Count
Basic Flows: 3
(ACL Based: 3, Unicast FDB Based: 0, Multicast FDB Based: 0)
Emergency Flows: 0
(ACL Based: 0, Unicast FDB Based: 0, Multicast FDB Based: 0)
Buffering Count:
Openflow Packets Buffered : 0
Openflow Packets Timed out : 0
Openflow Packets Retrieved : 0
Openflow Packets Retrieve attempts : 0
Message Count
Hello­Sent: 1 Hello­Received: 1
Echo­Request­Sent: 31 Echo­Request­Received: 60
Echo­Reply­Sent: 60 Echo­Reply­Received: 31
Vendor: 0
Chapter 3: Statistics Commands
289