PIM Component Configuration
614
G8264 Command Reference for ENOS 8.4
Table 338.
PIM Configuration Options
Command Syntax and Usage
default ip pim
Resets the PIM configuration to its default values.
Command mode: Global configuration
clear ip pim mroute
Clears PIM multicast router entries.
Command mode: Privileged EXEC
Use these commands to configure PIM components.
Table 339.
PIM Component Configuration Options
Command Syntax and Usage
ip pim component <1‐2>
Enter PIM component mode.
Command mode: Global configuration
mode {dense|sparse}
Configures the operational mode of the PIM router (dense or sparse).
Command mode: PIM Component
show ip pim component [<1‐2>]
Displays the current PIM component configuration settings.
Command mode: All