Lenovo RackSwitch G8264 Command Reference Manual page 752

752
G8264 Command Reference for ENOS 8.4
Thread LOG_ERR Message (continued)
IP6 EXCEPTIONAL CASE Trying to create IP6 Interface after the
Ip6Shutdown
IP6 Ip6SetAddr(failed):if=<interface>, rc=<reason code>
IP6 IPv6 route table full
IP6 ipv6_add_interface_immediate: Buffer Non Linear for
ip6_cfa_params
IP6 ipv6_add_nbrcache_immediate: Buffer Non Linear for
ip6_cfa_params
IP6 ipv6_add_prefix_immediate: Buffer Non Linear for
ip6_cfa_params
IP6 ipv6_rem_prefix_immediate: Buffer Non Linear for
ip6_cfa_params
IP6 ipv6_rem_route_immediate: Buffer Non Linear for
ip6_cfa_params
IP6 ipv6_vlan_change_immediate: Buffer Non Linear for
ip6_cfa_params
LLDP Error: Port <port> has the PVID <PVID> that is different from the
PVID <PVID> configured on the peer
LLDP Port <port>: Cannot add new entry. MSAP database is full!
MGMT Apply is issued by another user. Try later
MGMT cannot contact {primary|secondary} DNS server <IP address> ‐
{Mgmt|Ext‐mgt} port unavailable
MGMT Critical Error. Failed to add Interface <interface>
MGMT Critical Error. Failed to {add|attach} Loopback Interface
<interface>
MGMT Critical Error. Failed to detach Loopback Interface <interface>
MGMT Diff is issued by another user. Try later
MGMT Dump is issued by another user. Try later
MGMT Error: Apply not done
MGMT Error: Pushed {image1|image2} size <bytes> bigger than the
capacity <maximum bytes>.
MGMT Error: Invalid {image1|image2}
MGMT Error: Pushed {image1|image2} size <bytes> bigger than the
capacity <maximum bytes>.
MGMT Error: Save not done.
MGMT Firmware download failed (insufficient memory)