IPv6 Prefix Policy Table Configuration
© Copyright Lenovo 2017
The following table describes the configuration options for the IPv6 Prefix Policy
Table. The Prefix Policy Table allows you to override the default address selection
criteria.
Table 348.
IPv6 Prefix Policy Table Options
Command Syntax and Usage
[no] ip prefixpolicy <IPv6 prefix> <IPv6 prefix length>
<precedence (0‐100)> <label (0‐100)>
Adds or removes a Prefix Policy Table entry. Enter the following parameters:
IPv6 address prefix
Prefix length
Precedence: The precedence is used to sort destination addresses. Prefixes
with a higher precedence are sorted before those with a lower precedence.
Label: The label allows you to select prefixes based on matching labels.
Source prefixes are coupled with destination prefixes if their labels match.
Command mode: Global configuration
show ip prefixpolicy
Displays the current Prefix Policy Table configuration.
Command mode: All
Chapter 4: Configuration Commands
623