Ip Routing Information - Lenovo RackSwitch G8264 Command Reference Manual

IP Routing Information

© Copyright Lenovo 2017
Using the commands listed in the following table, you can display all or a portion
of the IP routes currently held in the switch.
Table 39.
Route Information Options
Command Syntax and Usage
show ip route [all]
Displays all routes configured in the switch. For more information, see
page 92.
Command mode: All
show ip route address <IP address>
Displays a single route by destination IP address.
Command mode: All
show ip route ecmphash
Displays the current ECMP hashing mechanism.
Command mode: All
show ip route gateway <IP address>
Displays routes to a single gateway.
Command mode: All
show ip route interface <interface number>
Displays routes on a single interface.
Command mode: All
show ip route port <port alias or number>
Displays routes on a single port.
Command mode: All
show ip route static
Displays static routes configured on the switch.
Command mode: All
show ip route tag {address|bgp|broadcast|fixed|martian|
|multicast|ospf|rip|static}
Displays routes of a single tag. For a description of IP routing tags, see Table 41
on page 92.
Command mode: All
show ip route type {broadcast|direct|indirect|local|
|martian|multicast}
Displays routes of a single type. For a description of IP routing types, see
Table 40 on page 92.
Command mode: All
Chapter 2: Information Commands
91