Access Control Configuration - Lenovo RackSwitch G8264 Command Reference Manual

Access Control Configuration

424
G8264 Command Reference for ENOS 8.4
Use these commands to create Access Control Lists. ACLs define matching criteria
used for IP filtering and Quality of Service functions.
For information about assigning ACLs to ports, see "Port ACL Configuration" on
page 411.
Table 196.
General ACL Configuration Options
Command Syntax and Usage
access­control group <1‐256>
Configures an ACL Group. To view command options, see page
Command mode: Global configuration
access­control list <1‐256>
Configures an Access Control List. To view command options, see page
Command mode: Global configuration
access­control list6 <1‐128>
Configures an IPv6 Access Control List. To view command options, see
page 435.
Command mode: Global configuration
access­control macl <1‐128>
Configures an Access Control List. To view command options, see page
Command mode: Global configuration
access­control vmap <1‐128>
Configures an ACL VLAN map. To view command options, see page
Command mode: Global configuration
show access­control
Displays the current ACL parameters.
Command mode: All
443.
425.
444.
448.