Ospfv3 Summary Range Configuration - Lenovo RackSwitch G8264 Command Reference Manual

OSPFv3 Summary Range Configuration

© Copyright Lenovo 2017
The following table describes the OSPFv3 Summary Range commands.
Table 290.
OSPFv3 Summary Range Configuration Options
Command Syntax and Usage
area­range <1‐16> address <IPv6 address> <prefix length (1‐128)>
Configures the base IPv6 address and subnet prefix length for the range.
Command mode: Router OSPF3
area­range <1‐16> area <area index (0‐2)>
Configures the area index used by the switch.
Command mode: Router OSPF3
[no] area­range <1‐16> enable
Enables or disables the OSPFv3 summary range.
Command mode: Router OSPF3
[no] area­range <1‐16> hide
Hides or shows the OSPFv3 summary range.
Command mode: Router OSPF3
area­range <1‐16> lsa­type {summary|Type7}
Configures the LSA type, as follows:
Summary LSA

Type7 LSA

Command mode: Router OSPF3
area­range <1‐16> tag <0‐4294967295>
Configures the route tag.
Command mode: Router OSPF3
no area­range <1‐16>
Deletes the OSPFv3 summary range.
Command mode: Router OSPF3
show ipv6 ospf area­range
Displays the current OSPFv3 summary range.
Command mode: All
Chapter 4: Configuration Commands
549