Lenovo RackSwitch G8264 Command Reference Manual page 584

IGMP Filtering Port Configuration
584
G8264 Command Reference for ENOS 8.4
The following table describes the commands used to configure a port for IGMP
filtering.
Table 315.
IGMP Filter Port Configuration Options
Command Syntax and Usage
[no] ip igmp filtering
Enables or disables IGMP filtering on this port.
Command mode: Interface port
[no] ip igmp profile <1‐16>
Adds or removes an IGMP filter to this port.
Command mode: Interface port
show interface port <port alias or number> igmp­filtering
Displays the current IGMP filter parameters for this port.
Command mode: All