Vmware Information - Lenovo RackSwitch G8264 Command Reference Manual

VMware Information

© Copyright Lenovo 2017
Use these commands to display information about Virtual Machines (VMs) and
VMware hosts in the data center. These commands require the presence of a
configured Virtual Center.
Table 74.
VMware Information Options
Command Syntax and Usage
show virt vmware hello
Displays Virtual Machine hello settings. For a sample output, see page
Command mode: All
show virt vmware hosts
Displays a list of VMware hosts. For a sample output, see page
Command mode: All
show virt vmware showhost {<host UUID>|<host IP address>|<host name>}
Displays detailed information about a specific VMware host. For a sample
output, see page 177.
Command mode: All
show virt vmware showvm {<VM UUID>|<VM IP address>|<VM name>}
Displays detailed information about a specific Virtual Machine (VM). For a
sample output, see page
Command mode: All
show virt vmware switchport­mapping
Displays ESX Server ‐ switchport mapping. For a sample output, see page
Command mode: All
show virt vmware vms
Displays the UUIDs and the names of all VMware VMs. For a sample output,
see page 178.
Command mode: All
178.
Chapter 2: Information Commands
176.
176.
178.
175