Lenovo RackSwitch G8264 Command Reference Manual page 697

© Copyright Lenovo 2017
When in stacking mode, the following stand‐alone features are not supported:
 sFlow port monitoring
Uni‐Directional Link Detection (UDLD)

 Port flood blocking
Storm control

 Routing Interface Protocol (RIP)
 Open Shortest Path First (OSPF)
 Open Shortest Path First version 3 (OSPFv3)
 Internet Protocol version 6 (IPv6)
 Virtual Router Redundancy Protocol (VRRP)
 Loopback Interfaces
 Router IDs
 Route maps
 Border Gateway Protocol (BGP)
 Static MAC address adding
Static multicast

 Multiple Spanning Tree Protocol (MSTP) settings for CIST, Name, Rev, and
Maxhop
 Internet Group Management Protocol (IGMP) Relay
 Internet Group Management Protocol version 3 (IGMPv3)
 IGMP Querier
 Multicast Listener Discovery (MLD)
 Microburst Detection
 Converged Enhanced Ethernet (CEE)
 Fibre Channel over Ethernet (FCoE)
 Precision Time Protocol (PTP)
 EasyConnect (EZC)
Python Scripting

 Openflow
Virtual Link Aggregation (VLAG)

 Static Link Aggregation Control Protocol (LACP)
Spanning Tree Protocol (STP) Root Guard and Loop Guard

 Protocol VLAN
 Unified Fabric Port (UFP)
 Edge Virtual Bridging (EVB)
 Ethernet Operation, Administration, and Maintenance (OAM)
 Weighted Random Early Detection (WRED)
 Explicit Congestion Notification (ECN)
Switch menus and commands for unsupported features may be unavailable or
may have no effect on switch operation.
697
Chapter 6: Boot Options