Vm Profile Configuration - Lenovo RackSwitch G8264 Command Reference Manual

VM Profile Configuration

© Copyright Lenovo 2017
Table 364.
VM Check Configuration Options
Command Syntax and Usage
[no] virt vmcheck trust <port alias or number>
Enables or disables trusted ports for VM communication.
By default, all ports are disabled.
Command mode: Global configuration
show virt vmcheck
Displays the current VM Check settings. See page
Command mode: All
The following table describes the VM Profiles configuration options.
Table 365.
VM Profile Configuration Options
Command Syntax and Usage
virt vmprofile <profile name (1‐39 characters)>
Defines a name for the VM profile. The switch supports up to 2048 VM
profiles.
Command mode: Global configuration
no virt vmprofile <profile name (1‐39 characters)>
Deletes the selected VM profile.
Command mode: Global configuration
virt vmprofile edit <profile name (1‐39 characters)> eshaping
<average (1‐1000000000)> <burst (1‐1000000000)> <peak (1‐1000000000)>
Configures traffic egress shaping parameters implemented in the hypervisor,
as follows:
Average traffic, in kilobits per second.

Maximum burst size, in kilobits.

Peak traffic, in kilobits per second.

Delete traffic shaping parameters.

Command mode: Global configuration
no virt vmprofile <profile name (1‐39 characters)> eshaping
Deletes the traffic egress shaping parameters for the specified VM profile.
Command mode: Global configuration
173 for sample output.
Chapter 4: Configuration Commands
643