Ipv6 Neighbor Cache Manipulation - Lenovo RackSwitch G8264 Command Reference Manual

IPv6 Neighbor Cache Manipulation

© Copyright Lenovo 2017
The following table describes the IPv6 Neighbor Cache manipulation commands.
Table 416.
IPv6 Neighbor Cache Manipulation Options
Command Syntax and Usage
show ipv6 neighbors
Shows all IPv6 Neighbor Cache entries.
Command mode: All
show ipv6 neighbors find <IPv6 address>
Shows a single IPv6 Neighbor Cache entry by IP address.
Command mode: All
show ipv6 neighbors interface port <port alias or number>
Shows IPv6 Neighbor Cache entries on a single port.
Command mode: All
show ipv6 neighbors static
Shows static IPv6 Neighbor Cache entries.
Command mode: All
show ipv6 neighbors vlan <VLAN ID (1‐4094)>
Shows IPv6 Neighbor Cache entries on a single VLAN.
Command mode: All
clear ipv6 neighbors
Clears all IPv6 Neighbor Cache entries from switch memory.
Command mode: Privileged EXEC
Chapter 7: Maintenance Commands
739