Vmware Distributed Port Group Operations - Lenovo RackSwitch G8264 Command Reference Manual

VMware Distributed Port Group Operations

© Copyright Lenovo 2017
Use these commands to administer a VMware distributed port group.
Table 392. VMware Distributed Port Group Operations (/oper/virt/vmware/dpg)
Command Syntax and Usage
virt vmware dpg add <port group name> <dvSwitch name>
<VLAN ID (1‐4094)> [ishaping <bandwidth> <burst size> <peak bandwidth>]
[eshaping <bandwidth> <burst size> <peak bandwidth>]
Adds the specified port group to the specified dvSwitch. You may enter the
following parameters:
ishaping: Enables ingress shaping. Supply the following information:

• average bandwidth in kilobits per second
• burst size in kilobits
• peak bandwidth in kilobits per second
eshaping: Enables engress shaping. Supply the following information:

• average bandwidth in kilobits per second
• burst size in kilobits
• peak bandwidth in kilobits per second
Command Mode: All
virt vmware dpg del <port group name> <dvSwitch name>
Removes the specified port group from the specified dvSwitch.
Command Mode: All
virt vmware dpg update <port group name> <dvSwitch name>
<VLAN ID (1‐4094)> [ishaping <bandwidth> <burst size> <peak bandwidth>]
[eshaping <bandwidth> <burst size> <peak bandwidth>]
Updates the specified port group on the specified dvSwitch. You may enter the
following parameters:
ishaping: Enables ingress shaping. Supply the following information:

• average bandwidth in kilobits per second
• burst size in kilobytes
• peak bandwidth in kilobits per second
eshaping: Enables egress shaping. Supply the following information:

• average bandwidth in kilobits per second
• burst size in kilobytes
• peak bandwidth in kilobits per second
Command Mode: All
virt vmware dpg vmac <VNIC MAC> <port group name>
Adds the specified VM NIC to the specified port group.
Command Mode: All
Chapter 5: Operations Commands
691