Port Transceiver Status - Lenovo RackSwitch G8264 Command Reference Manual

Port Transceiver Status

© Copyright Lenovo 2017
The following command displays the status of the transceiver module on each
port:
show interface transceiver
Command mode: All
Port Link Transceiver Vendor Part Approve
­­­­­­­­­­­ ­­­­­ ­­­­­­­­­­­­­­­ ­­­­­­­­­­­­­­ ­­­­­­­­­­­­­­­ ­­­­­­­­
1 Q10G 1.A LINK PasQDBO­A 1.0m BLADE NETWORK BN­QS­SP­CBL­1M Approved
2 Q10G 1.B LINK PasQDBO­B 1.0m BLADE NETWORK BN­QS­SP­CBL­1M Approved
3 Q10G 1.C LINK PasQDBO­C 1.0m BLADE NETWORK BN­QS­SP­CBL­1M Approved
4 Q10G 1.D LINK PasQDBO­D 1.0m BLADE NETWORK BN­QS­SP­CBL­1M Approved
5 Q10G 2.A < NO Device Installed >
6 Q10G 2.B < NO Device Installed >
7 Q10G 2.C < NO Device Installed >
8 Q10G 2.D < NO Device Installed >
9 QSFP+ 3 LINK UnEqQD 3.0m BLADE NETWORK BN­QS­QS­CBL­3M Accepted
13 Q10G 4.A < NO Device Installed >
14 Q10G 4.B < NO Device Installed >
15 Q10G 4.C < NO Device Installed >
16 Q10G 4.D < NO Device Installed >
17 SFP+ 1 < NO Device Installed >
18 SFP+ 2 < NO Device Installed >
19 SFP+ 3 < NO Device Installed >
20 SFP+ 4 < NO Device Installed >
21 SFP+ 5 < NO Device Installed >
22 SFP+ 6 < NO Device Installed >
23 SFP+ 7 < NO Device Installed >
24 SFP+ 8 < NO Device Installed >
This command displays information about the transceiver module on each port, as
follows:
Port number and alias

 Link status
Media/Transceiver type (LX, LR, SX, SR, DAC, PasDAC) and laser wavelength,

in nanometers
 Vendor name
 Part number
 Approval status
Chapter 2: Information Commands
167