Lenovo RackSwitch G8264 Command Reference Manual page 532

532
G8264 Command Reference for ENOS 8.4
Table 278.
RIP Interface Options (continued)
Command Syntax and Usage
ip rip metric <1‐15>
Configures the route metric, which indicates the relative distance to the
destination.
The default value is 1.
Command mode: Interface IP
[no] ip rip multicast­updates
Enables or disables multicast updates of the routing table (using address
224.0.0.9).
The default value is enabled.
Command mode: Interface IP
[no] ip rip poison
When enabled, the switch uses split horizon with poisoned reverse. When
disabled, the switch uses only split horizon.
The default value is disabled.
Command mode: Interface IP
[no] ip rip split­horizon
Enables or disables split horizon.
The default value is enabled.
Command mode: Interface IP
[no] ip rip supply
When enabled, the switch supplies routes to other routers.
The default value is enabled.
Command mode: Interface IP
[no] ip rip triggered
Enables or disables Triggered Updates. Triggered Updates are used to speed
convergence. When enabled, Triggered Updates force a router to send update
messages immediately, even if it is not yet time for the update message.
The default value is enabled.
Command mode: Interface IP
ip rip version {1|2|both}
Configures the RIP version used by this IP interface.
The default value is version 2.
Command mode: Interface IP
show interface ip <1‐128> rip
Displays the current settings for the RIP interface.
Command mode: All