IPv6 Metering Configuration
© Copyright Lenovo 2017
These commands define the Access Control profile for the selected ACL.
Table 213.
IPv6 Metering Options
Command Syntax and Usage
accesscontrol list6 <1‐128> meter action {drop|pass}
Configures the ACL Meter to either drop or pass out‐of‐profile traffic.
Command mode: Global configuration
accesscontrol list6 <1‐128> meter committedrate <64‐10000000>
Configures the committed rate, in kilobits per second. The committed rate
must be a multiple of 64.
Command mode: Global configuration
[no] accesscontrol list6 <1‐128> meter enable
Enables or disables ACL Metering.
Command mode: Global configuration
accesscontrol list6 <1‐128> meter maximumburstsize <32‐4096>
Configures the maximum burst size, in kilobits. Enter one of the following
values for mbsize: 32, 64, 128, 256, 512, 1024, 2048, 4096.
Command mode: Global configuration
default accesscontrol list6 <1‐128> meter
Sets the ACL meter configuration to its default values.
Command mode: Global configuration
show accesscontrol list6 <1‐128> meter
Displays current ACL Metering parameters.
Command mode: All
Chapter 4: Configuration Commands
441