Lenovo RackSwitch G8264 Command Reference Manual page 89

© Copyright Lenovo 2017
Table 38.
Layer 3 Information Commands (continued)
Command Syntax and Usage
show ipv6 ospf information
Displays OSPFv3 information. For more OSPFv3 information options, see
page 108.
Command mode: All
show ip pim component [<1‐2>]
Displays Protocol Independent Multicast (PIM) component information. For
more PIM information options, see page
Command mode: All
show ipv6 pmtu [<destination IPv6 address>]
Displays IPv6 Path MTU information. For details, see page
Command mode: All
show ip policy
Displays the current routing policy information.
Command mode: All
show ip prefix­policy
Displays the current Prefix Policy Table configuration.
Command mode: All
show ipv6 prefix
Displays IPv6 Neighbor Discovery prefix information. For details, see
page 118.
Command mode: All
show ip rip
Displays the current Routing Information Protocol (RIP) configuration. For
details, see page 113.
Command mode: All
show ip route
Displays all routes configured on the switch. For details, see page
Command mode: All
show ipv6 route
Displays IPv6 routing information. For more information options, see
page 115.
Command mode: All
show ip routing
Displays the current IP forwarding settings.
Command mode: All
139.
131.
Chapter 2: Information Commands
92.
89