Netconf Configuration; Netconf Over Ssh Configuration - Lenovo RackSwitch G8264 Command Reference Manual

NETCONF Configuration

NETCONF over SSH Configuration

© Copyright Lenovo 2017
This menu allows you to configure support for Network Configuration Protocol
(NETCONF), which provides mechanisms to install, manipulate and delete the
configuration of network devices. NETCONF is described in RFC 4741.
Table 169.
NETCONF Configuration Options
Command Syntax and Usage
[no] access netconf enable
Enables or disables NETCONF access to the switch.
Command mode: Global configuration
access netconf timeout <30‐3600>
Configures the timeout value for NETCONF sessions, in seconds.
The default value is 300 seconds.
Command mode: Global configuration
default access netconf timeout
Resets the timeout value for NETCONF sessions to the default of 300 seconds.
Command mode: Global configuration
show access
Displays the current configuration.
Command mode: All
This menu allows you to enable NETCONF access over Secure Shell (SSH).
NETCONF over SSH is described in RFC 4742.
Table 170.
NETCONF over SSH Configuration Options
Command Syntax and Usage
[no] access netconf ssh enable
Enables or disables NETCONF access over SSH.
Command mode: Global configuration
access netconf ssh port <TCP port number (1‐65535)>
Configures the TCP port used for NETCONF.
The default port number is 830.
Command mode: Global configuration
default netconf ssh port
Resets the SSH port used for NETCONF to the default port number ‐ 830.
Command mode: Global configuration
Chapter 4: Configuration Commands
389