Lenovo RackSwitch G8264 Command Reference Manual page 53

© Copyright Lenovo 2017
Table 19.
Stacking Information Options
Command Syntax and Usage
show stack dynamic
Displays all stacking information.
Command mode: All
show stack link
Displays link information for each switch in the stack, listed by assigned
switch number.
Command mode: All
show stack name
Displays the name of the stack.
Command mode: All
show stack path­map [<configured switch number (1‐8)>]
Displays the stacking packet path map that shows how the stack switches are
connected.
Note: This command is available only on the master switch.
Command mode: All
show stack push­status
Displays the status of the most recent firmware and configuration file push
from the master to member switches.
Note: This command is available only on the master switch.
Command mode: All
show stack switch
Displays information about each switch in the stack, including:
Configured Switch Number (csnum)

Attached Switch Number (asnum)

MAC address

Stacking state

For details, see page
Command mode: All
show stack switch­number [<configured switch number (1‐8)>]
Displays the MAC addresses for all configured switches in the stack or a
specific configured switch.
Note: This command is available only on the master switch.
Command mode: All
show stack version
Displays the firmware version number for the selected switch.
Command mode: All
54.
Chapter 2: Information Commands
53