Lenovo RackSwitch G8264 Command Reference Manual page 762

762
G8264 Command Reference for ENOS 8.4
Thread LOG_NOTICE Message (continued)
MGMT syslog host changed to {this host|<IP address>}
MGMT System clock set to <time>.
MGMT System date set to <date>.
MGMT Terminating BBI connection from host <IP address>
MGMT User <username> deleted by {SNMP user|<username>}.
MGMT User <username> is {deleted|disabled} and will be ejected by
{SNMP user|<username>}
MGMT User {oper|operator} is disabled and will be ejected by {SNMP
user|<username>}.
MGMT Wrong config file type
NETCONF <username> (<user level>) connection closed from address via
NETCONF over <connection type>
NETCONF <username> (<user level>) login from host <IP address> via
NETCONF over <connection type>
NTP System clock updated
OSPF Neighbor Router ID <router ID>, Neighbor State {Down|
Loopback|Waiting|P To P|DR|BackupDR|DR Other|Attempt|
Init|2 Way|ExStart|Exchange|Loading|Full}
OSPFV3 Link state database is FULL.Ignoring LSA.
OSPFV3 nbr <router ID> changes state from {DOWN|ATTEMPT|INIT|
2WAY|EXSTART|EXCHANGE|LOADING|FULL} to {DOWN|
ATTEMPT|INIT|2WAY|EXSTART|EXCHANGE|LOADING|
FULL}[, Neighbor Down: {Interface down or detached|Dead timer
expired}]
OSPFV3 virtual link nbr <router ID> changes state from {DOWN|
ATTEMPT|INIT|2WAY|EXSTART|EXCHANGE|LOADING|
FULL} to {DOWN|ATTEMPT|INIT|2WAY|EXSTART|
EXCHANGE|LOADING|FULL}[, Neighbor Down: {Interface
down or detached|Dead timer expired}]
SERVER link {down|up} on port <port>
SSH (remote disconnect msg)
SSH <username>(<user type>) {logout|ejected|idle timeout|connection
closed} from {Console|Telnet/SSH}
SSH <username>(<user type>) login {on Console|from host <IP address>}
SSH Error in setting the new config
SSH Failed login attempt via SSH
SSH New config set