IKEv2 Identification Configuration
© Copyright Lenovo 2017
The following table describes the commands used to configure IKEv2
identification.
Table 321.
IKEv2 Identification Options
Command Syntax and Usage
ikev2 identity local address
Configures the switch to use the supplied IPv6 address as identification.
Command mode: Global configuration
ikev2 identity local fqdn <1‐32 characters>
Configures the switch to use the fully‐qualified domain name (such as
"example.com") as identification.
Command mode: Global configuration
ikev2 identity local email <1‐32 characters>
Configures the switch to use the supplied email address (such as
"xyz@example.com") as identification.
Command mode: Global configuration
show ikev2 identity
Displays the current IKEv2 identification settings.
Command mode: All
Chapter 4: Configuration Commands
591