Lenovo RackSwitch G8264 Command Reference Manual page 695

© Copyright Lenovo 2017
Table 394.
Boot Stacking Options (continued)
Command Syntax and Usage
default boot stack [master|backup|<attached switch number (1‐16)>|
|all]
Resets the Stacking boot parameters to their default values.
Note: The optional command elements are available only on the master
switch.
Command mode: Global configuration
copy {ftp|sftp} {image1|image2} [data­port|mgt­port]
staggered­upgrade [delay <2‐20>]
Loads the specified stacking software image to all member switches using
FTP/SFTP and then reboots the whole stack. The stack is rebooted one switch
at a time, starting with the backup switch, followed by the master switch and
then the other members of the stack. The delay option configures the time, in
minutes, between each switch reboot.
Note: This command is available only on the master switch.
Command mode: Privileged EXEC
copy tftp {image1|image2} address <hostname or server IP address>
filename <server‐filename> [data­port|mgt­port]
staggered­upgrade [delay <2‐20>]
Loads the specified stacking software image to all member switches using
TFTP and then reboots the whole stack. The stack is rebooted one switch at a
time, starting with the backup switch, followed by the master switch and then
the other members of the stack. The delay option configures the time, in
minutes, between each switch reboot.
Note: This command is available only on the master switch.
Command mode: Privileged EXEC
695
Chapter 6: Boot Options