Using The Boot Management Menu - Lenovo RackSwitch G8264 Command Reference Manual

Using the Boot Management Menu

© Copyright Lenovo 2017
The Boot Management menu allows you to switch the software image, reset the
switch to factory defaults or to recover from a failed software download.
You can interrupt the boot process and enter the Boot Management menu from the
serial console port. When the system displays Memory Test, press <Shift + B>. The
Boot Management menu appears.
Boot Management Menu
I ­ Change booting image
C ­ Change configuration block
R ­ Boot in recovery mode (tftp and xmodem download of images to
recover switch)
Q ­ Reboot
E ­ Exit
Please choose your menu option:
The Boot Management menu allows you to perform the following actions:
 To change the booting image, press I and follow the screen prompts.
 To change the configuration block, press C and follow the screen prompts.
 To boot in recovery mode press R. For more details see "Boot Recovery Mode"
on page 716.
 To restart the boot process from the beginning, press Q.
 To exit the Boot Management menu, press E. The booting process continues.
715
Chapter 6: Boot Options