Lenovo RackSwitch G8264 Command Reference Manual page 747

© Copyright Lenovo 2017
Thread LOG_ALERT Message (continued)
oflow Switch is configured to function in Openflow Mode
oflow Switch is configured to function in Normal Mode
oflow WARNING! In Hybrid Mode with Openflow enabled, legacy
switching features are not supported on Openflow ports. Features
involving TCAM resources are not supported on all ports.
oflow WARNING! In Openflow Only Mode, legacy switching features
are not supported on all ports.
oflow Openflow Instance <x> disabled
oflow Openflow Instance <x> deleted
oflow Openflow Instance <x>: No Controller Available for Connection
oflow Openflow Instance <x>: Failed to receive Hello Message from
Controller <y> A.B.C.D
oflow Openflow Instance <x>: Connection stopped with Controller <y>
A.B.C.D
oflow Openflow Instance <x>: Version Negotiation Failed with
Controller <y> A.B.C.D
oflow Openflow Instance <x>: Connection established with Controller
<y> A.B.C.D
oflow Openflow Instance <x>: port <z> administratively disabled by
controller
oflow Openflow Instance <x>: port <z> administratively enabled by
controller
oflow ACL table full. Could not add MPLS pop ACL entry for Openflow
Flow Table
oflow ACL table full. Could not add MPLS push ACL entry for
Openflow Flow Table
oflow Openflow Instance <x> Maximum permitted multicast FDB flows
reached
oflow Openflow Instance <x> Maximum permitted unicast FDB flows
reached
oflow Openflow Instance <x> Maximum permitted ACL flows reached
oflow Openflow Instance <x> Maximum permitted MPLS PUSH flows
reached
oflow Openflow Instance <x> Maximum permitted MPLS POP flows
reached
oflow FDB table full. Could not add FDB entry to Openflow Flow Table
Appendix A: Enterprise NOS System Log Messages
747