Adding Controller - ABB PickMaster Twin - PowerPac Applications Manual

4.2.2 Adding Controller

Overview
This section describes how to add and modify a controller.
xx1900000572
Create a controller
For more information on how to create a controller, refer to Operating
manual - RobotStudio.
Application manual - PickMaster® Twin - PowerPac
3HAC064218-001 Revision: B
WARNING
When creating an OmniCore controller, the Remote Start and Stop in Auto must
be selected. Or the PickMaster PowerPac CANNOT run simulation or production.
xx2100000051
© Copyright 2021 ABB. All rights reserved.
4 Working with PickMaster PowerPac
4.2.2 Adding Controller
Continues on next page
75