Sensors
Managing camera
Right-click on a Camera icon. The following window is displayed.
xx1800001397
Configuration
Calibration
Application manual - PickMaster® Twin - PowerPac
3HAC064218-001 Revision: B
3 Navigating PickMaster PowerPac
Description
Allows you to configure the selected camera.
When you right-click on a camera and select Configuration, the
Camera Configuration window is displayed. More details about
managing a camera is available in the section
on page
181.
Allows you to calibrate the selected camera.
When you right-click on a camera and select Calibration, the Camera
Calibration window is displayed. More details about managing a
camera is available in the section
© Copyright 2021 ABB. All rights reserved.
3.4.1 Cell
Continued
Configuring camera
Calibrating camera on page
Continues on next page
234.
63