Table of Contents
Advertisement
4 Working with PickMaster PowerPac
4.2.10 Adding Flow
Continued
Z pos dev min/max
Rejection Ratio
Layout Size
Edit Layout
xx1900000584
Layer ID
Pattern Template
Available Objs
Align Style
Distribute Style
Continues on next page
138
Description
Defines the minimum and maximum deviation of the Z position from
the correct value.
Defines the probability that an item becomes rejected by a camera.
If set to 0%, the item setting "Rejected" in the Layout will decide if
the item is rejected.
Allows you to edit the size of the layout.
Edit Layout allows you to edit the selected flow.
For more information regarding Edit Layout see the following section.
Description
Allows you to rename the layer.
Allows you to select a predefined pattern template.
The drop down list allows you to select one item you have created for
this system.
Add icon allows you to add the selected item onto the layer.
Allows you to define the align style when you have more than one item
in the layer.
Left icon allows you to align all the items in this layer from the left.
Right icon allows you to align all the items in this layer from the right.
Center icon allows you to align all the items in this layer from the center.
Middle icon allows you to align all the items in this layer from the middle.
Top icon allows you to align all the items in this layer at from top.
Bottom icon allows you to align all the items in this layer from the bot-
tom.
Allows you to define the distribution style when you have more than
one item in the layer.
Horizontally icon allows you to distribute all the items in the horizontal
direction.
Vertically icon allows you to distribute all the items in the vertical direc-
tion.
Application manual - PickMaster® Twin - PowerPac
© Copyright 2021 ABB. All rights reserved.
3HAC064218-001 Revision: B
Advertisement
Table of Contents
Troubleshooting
