ABB PickMaster Twin - PowerPac Applications Manual page 152

4 Working with PickMaster PowerPac
4.2.10 Adding Flow
Continued
Z pos dev min/max
Rejection Ratio
Inner Outer Radius
Sector Angle(deg)
Edit Layout
xx1900000585
Layer ID
Pattern Template
Available Objs
Else Functions
Selected Item(s)
Continues on next page
152
Description
Defines the minimum and maximum deviation of the Z position
from the correct value.
Defines the probability that an item becomes rejected by a camera.
If set to 0%, the item setting "Rejected" in the Layout will decide if
the item is rejected.
Allows you to edit the inner and outer radius of the working area.
Edit Layout allows you to edit the selected flow.
For more information regarding Edit Layout see the following sec-
tion.
Description
Allows you to rename the layer.
Allows you to select a predefined pattern template.
The drop down list allows you to select one item you have created for
this system.
Add icon allows you to add the selected item onto the layer.
Rotate icon allows you to rotate the selected items.
Delete icon allows you to delete the selected items.
Select All icon allows you to select all the items in the layer.
Show Item Name checkbox allows you to show the name of the items.
Show Item Order checkbox allows you to show the added order of the
items.
Allows you to define the location and position of each items.
Application manual - PickMaster® Twin - PowerPac
© Copyright 2021 ABB. All rights reserved.
3HAC064218-001 Revision: B