ABB PickMaster Twin - PowerPac Applications Manual page 174

4 Working with PickMaster PowerPac
4.3.1 Switching to real Runtime
Continued
Select a real controller
Use this procedure to select a real controller:
Continues on next page
174
4 Click OK.
Tip
If switch failed, the status window will show up.
The Status window is opened.
xx1800001462
Note
If the user meets any problem when building connection between PickMaster
PowerPac and real Runtime, please check from below possible reasons:
1 Using a host account that is not administrator;
2 Firewall blocking;
3 VPN interference;
4 SSH not installed or down or stuck (Occasionally due to computer
environment the SSH.exe cannot be installed successfully);
5 Host IP address incorrect, or not in the same IP segment as the client port.
1 Right-click the Controller in the tree view Cell and select Edit Controller.
xx1800001712
© Copyright 2021 ABB. All rights reserved.
Application manual - PickMaster® Twin - PowerPac
3HAC064218-001 Revision: B