ABB PickMaster Twin - PowerPac Applications Manual page 86

4 Working with PickMaster PowerPac
4.2.4 Adding Conveyor
Continued
Item
Preview icon
Reference Coordinate
Position XYZ(mm)
Orientation XYZ(deg)
Conveyor Signal
Controller
Procedure
On the PickMaster PowerPac ribbon-tab, click Layout.
Use this procedure to add conveyors:
Continues on next page
86
Description
Click to preview the new conveyor.
Allows you to select the reference coordinate for the conveyor.
Allows you to set the position of the conveyor.
Allows you to set the orientation of the conveyor.
Allows you to choose the setting of the signal.
Allows you to choose the controller to be used.
1 On the ribbon-tab, click Conveyor.
xx1800000855
The Conveyor window opens.
xx1800000856
2 In the Conveyor window, enter a name in the Conveyor Name text box or
use the default one.
3 In the Conveyor window, select a type as liner or circular in the Conveyor
Type drop-down list.
© Copyright 2021 ABB. All rights reserved.
Application manual - PickMaster® Twin - PowerPac
3HAC064218-001 Revision: B