Example: Mixing One Pick Work Area And Two Place Work Areas - ABB PickMaster Twin - PowerPac Applications Manual

5 Production examples

5.3 Example: Mixing one pick work area and two place work areas

5.3 Example: Mixing one pick work area and two place work areas
Overview
This example describes a solution which contains one robot, two linear conveyors
and one circular conveyor. The robot picks the cylinder items from circular conveyor
and place them into the containers on the first linear conveyor and the box items
from circular conveyor and place them into the containers on the second linear
conveyor separately at the same time.
xx1900000531
Creating the solution
Opening the solution
For detail procedure in opening the solution, see
Adding the controller
For detail procedure in adding the controller, see
Adding the gripper
For detail procedure in adding the controller, see
Adding the conveyor
1
Continues on next page
336
Action
On the ribbon-tab, click Conveyor under
Layout.
© Copyright 2021 ABB. All rights reserved.
Opening the solution on page
Adding the controller on page
Adding the gripper on page
Note/Illustration
xx1800000855
Application manual - PickMaster® Twin - PowerPac
307.
308.
309.
3HAC064218-001 Revision: B