ABB PickMaster Twin - PowerPac Applications Manual page 314

5 Production examples
5.1 Example: One pick work area and one place work area
Continued
8
9
10
11
12
Adding the item
1
2
3
4
Continues on next page
314
Action
In the Conveyor Workarea window, enter
"LinearWA2" in the Workarea Name text
box.
In the Conveyor Board drop down list,
select the correct conveyor board which
has been connected to the liner conveyor.
Tip
The connection between the conveyor
board and the conveyor are defined by
users.
In the Conveyor drop down list, select
the "Linear2" conveyor.
In the Workarea Type radio box, select
the "Place" option.
Click OK to finish the adding of the linear
2 conveyor work area.
Action
On the ribbon-tab, click Item under Re-
cipe.
In the Item Type part under Item Proper-
ties, select the Cylinder radio box.
In the RH Size part under Item Proper-
ties, define the item's size as (50, 5).
In the Color part under Item Properties,
define the item's color as RGB
(255,128,128).
© Copyright 2021 ABB. All rights reserved.
Note/Illustration
xx1900000659
Note/Illustration
xx1800001429
xx1900000660
xx1900000485
Application manual - PickMaster® Twin - PowerPac
3HAC064218-001 Revision: B