ABB PickMaster Twin - PowerPac Applications Manual page 339

Adding the work area
1
2
3
4
5
6
7
Application manual - PickMaster® Twin - PowerPac
3HAC064218-001 Revision: B
5.3 Example: Mixing one pick work area and two place work areas
Action
On the ribbon-tab, click Circular Convey-
or Workarea under Layout.
In the Conveyor Workarea window, enter
"CircularWA" in the Workarea Name text
box.
In the Conveyor Board drop down list,
select the correct conveyor board which
has been connected to the circular con-
veyor.
Tip
The connection between the conveyor
board and the conveyor are defined by
users.
In the Conveyor drop down list, select
the "Circular" conveyor.
In the Workarea Type radio box, select
the "Pick" option.
Click OK to finish the adding of the circu-
lar conveyor work area.
On the ribbon-tab, click Workarea under
Layout.
© Copyright 2021 ABB. All rights reserved.
5 Production examples
Note/Illustration
xx1800001420
xx1900000481
xx1800001417
Continues on next page
Continued
339