Installation; Pickmaster Package - ABB PickMaster Twin - PowerPac Applications Manual

2 Installation

2.1 PickMaster package

Concepts of using PickMaster Twin
PickMaster PowerPac is designed to be installed on a laptop computer that can
host solutions for many different installations that can be connected for
commissioning, new recipe introduction, maintenance and servicing purposes to
the several physical installations, where each one of those have their own
permanent host computer.
There are two software installation packages: PickMaster Twin Client for the portable
engineering system and PickMaster Twin Host for the permanent factory system.
The Client installation does not require any physical equipment installations. All
physical component installations, configurations and calibrations are doneon the
host system.
PickMaster Twin Client
The installations package for PickMaster Twin offline configuration, simulation and
testing is named as PickMaster Twin Client. It installs the following softwares:
Software Installation Package
Registered ABB customers can download the latest version of the PickMaster Twin
Client and the user documentation for PickMaster PowerPac from the ABB download
center.
Application manual - PickMaster® Twin - PowerPac
3HAC064218-001 Revision: B
• PickMaster PowerPac
• PickMaster Virtual Runtime
• PickMaster Real Runtime
Note
This package is only intended for engineering and not for the final factory
production installation. The ability to switch to real runtime on the same computer
is only intended for test purposes and it can be used for creating and editing
vision models offline. For this purpose a vision demo dongle can be used.
Tip
The download center address is
https://new.abb.com/products/robotics/application-software/pickmaster.
Note
The PickMaster software is available in 64-bit version.
© Copyright 2021 ABB. All rights reserved.
2 Installation
2.1 PickMaster package
Continues on next page
17