ABB PickMaster Twin - PowerPac Applications Manual page 104

4 Working with PickMaster PowerPac
4.2.7 Adding Item
Continued
Procedure
On the PickMaster PowerPac ribbon-tab, click Recipe.
xx1800001438
Use this procedure to add an item:
Related information
Configuring inspection models on page
104
1 On the ribbon-tab, click Item.
xx1800001429
The New Item window opens.
xx1800001430
2 If needed, define levels for accepted or rejected item types.
When inspection is used, a found item will be marked as either accepted or
rejected. The values for accepted and rejected item type in the Item
Configuration dialog are sent to the RAPID program and are processed
there. See Configuring inspection models on page
3 In the RH Size part, define the item's size.
The height of the item defines the pick height and is always added to items
found by a vision model or a position defined by a predefined position source.
4 Click OK.
© Copyright 2021 ABB. All rights reserved.
264.
264.
Application manual - PickMaster® Twin - PowerPac
3HAC064218-001 Revision: B