Adding Work Area - ABB PickMaster Twin - PowerPac Applications Manual

4.2.6 Adding work area

Overview
This section describes how to add a work area.
xx1900000578
Adding a work area
The conveyor work area is an area on the conveyor where the robot picks or places
items. One conveyor board is required for each conveyor work area. A robot usually
has only one conveyor work area on each related conveyor, but there is no
restriction.
The Conveyor Workarea window opens as illustrated below.
xx1800001419
Workarea Name
Application manual - PickMaster® Twin - PowerPac
3HAC064218-001 Revision: B
4 Working with PickMaster PowerPac
Description
Type a name for the conveyor work area.
© Copyright 2021 ABB. All rights reserved.
4.2.6 Adding work area
Continues on next page
93