ABB PickMaster Twin - PowerPac Applications Manual page 61

Setting
Delete
Rename
Hotspots...
Examine
The following figure and table provides details about the Set Conveyor hotspots
window.
xx1800001395
Hotspots list
Position X Y Z
Application manual - PickMaster® Twin - PowerPac
3HAC064218-001 Revision: B
3 Navigating PickMaster PowerPac
Description
Allows you to manage the settings of the selected conveyor.
When you select Setting, the Conveyor Setting window is displayed.
More details about managing a selected conveyor is available in the
section Adding Conveyor on page
Allows you to delete the selected conveyor.
Allows you to change the name of the selected conveyor.
Allows you to manage the hotspots.
When you select Hotspots..., the Set Conveyor hotspots window
is displayed. See the following section for more details about the
Set Conveyor hotspots window.
Note
The hotspot is a saved location on the conveyor. A hotspot is used
to define where on the conveyor the flow shall be generated. There
is always a default hotspot, Hotspot0, located at the beginning of
the conveyor. If the flow appears at a wrong location, modify the
hotspot location to adjust it.
Allows you to examine the selected conveyor in the Station view.
Description
Displays the available hotspots.
Allows you define the position of the hotspot.
© Copyright 2021 ABB. All rights reserved.
3.4.1 Cell
Continued
85.
Continues on next page
61