ABB PickMaster Twin - PowerPac Applications Manual page 76

4 Working with PickMaster PowerPac
4.2.2 Adding Controller
Continued
Adding a controller
The Add Existing System dialog box opens as illustrated below.
xx1800000846
Item
System Pool
Manage System
System Found
Reset system(I-start)
Import new libraries
Use existing station librar-
ies
Continues on next page
76
Note
Only the Controller that is created before this page is opened can be found in
the System Found.
If a new Controller is created, the user need to refresh the Add Existing System
dialog box.
© Copyright 2021 ABB. All rights reserved.
Description
System Pool specify the location and folder of your PC where
the required controller systems are stored.
Add icon allows you to choose the folder system from the list
that you pre-defined in the RobotStudio.
Remove icon allows you to remove the folder system from the
list that you pre-defined in the RobotStudio
Allows you to create or work with a robot system.
Lists the systems found in the selected system folder.
The controller will restart when this is selected.
Add the predefined robot to the PickMaster PowerPac.
Open an existed system from the RobotStudio.
Application manual - PickMaster® Twin - PowerPac
3HAC064218-001 Revision: B