ABB PickMaster Twin - PowerPac Applications Manual page 77

Item
Sync RAPID program to
station
Procedure
On the PickMaster PowerPac ribbon-tab, click Layout.
Use this procedure to add a controller:
Application manual - PickMaster® Twin - PowerPac
3HAC064218-001 Revision: B
Note
You can only add the existed controller in the system to the solution. For more
information about create controller, see
Note
The controller must be created before this step.
1 On the ribbon-tab, click Controller.
xx1800000845
© Copyright 2021 ABB. All rights reserved.
4 Working with PickMaster PowerPac
Description
Sync the application program to the solution.
Create a controller on page
4.2.2 Adding Controller
Continued
75.
Continues on next page
77