5 Production examples
5.1 Example: One pick work area and one place work area
Continued
2
3
4
5
6
7
8
9
10
Continues on next page
310
Action
In the Conveyor window, enter "Linear1"
in the Conveyor Name text box.
In the Conveyor window, select the type
as "Linear" in the Conveyor Type drop-
down list.
Click on the Preview button to set the
preference of the conveyor.
Enter numbers (3000,400,500) in the LWH
Size(mm) text box to define the size of
the conveyor.
In the Conveyor window, enter numbers
(-1000,-400,0) in the Position X Y Z (mm)
text box and (0,0,0) in the Orientation
(deg) text boxes to define the location of
the conveyor.
Click OK to finish the adding of the con-
veyor.
On the ribbon-tab, click Conveyor under
Layout.
In the Conveyor window, enter "Linear2"
in the Conveyor Name text box.
In the Conveyor window, select the type
as "Linear" in the Conveyor Type drop-
down list.
© Copyright 2021 ABB. All rights reserved.
Note/Illustration
xx1900000653
xx1900000654
xx1800000855
xx1900000655
Application manual - PickMaster® Twin - PowerPac
3HAC064218-001 Revision: B