Table of Contents
Advertisement
4 Working with PickMaster PowerPac
4.4 Using color vision
Continued
Continues on next page
294
output grayscale image. Colors that are dissimilar to the specified color
will be converted to black.
xx1900000943
c Click Get color to store this color range.
xx1900000944
4 In the Manual color filter part, adjust each color channel to improve the result
if needed.
•
Low specifies the lower limit of the color range that will translate into
white pixels in the output image. Minimum is 0 and maximum is 255,
except for Hue which has no boundary.
•
High specifies the upper limit of the color range that will translate into
white pixels in the output image. Minimum is 0 and maximum is 255
except for Hue which has no boundary.
•
Fuzzy specifies how colors outside the minimum and maximum
thresholds should be filtered to the output grayscale image. A value
of 0 indicates that colors outside the range specified by Low and High
will be completely removed by the filter - the result is a black and white
image. A non-zero value means that colors outside the Low/High range
© Copyright 2021 ABB. All rights reserved.
Application manual - PickMaster® Twin - PowerPac
3HAC064218-001 Revision: B
Advertisement
Table of Contents
Troubleshooting
