ABB PickMaster Twin - PowerPac Applications Manual page 337

2
3
4
5
6
7
8
9
10
Application manual - PickMaster® Twin - PowerPac
3HAC064218-001 Revision: B
5.3 Example: Mixing one pick work area and two place work areas
Action
In the Conveyor window, enter "Circular"
in the Conveyor Name text box.
In the Conveyor window, select the type
as "Circle" in the Conveyor Type drop-
down list.
Click on the Preview button to set the
preference of the conveyor.
Enter numbers (550,500) in the RH
Size(mm) text box to define the size of
the conveyor.
In the Conveyor window, enter numbers
(0,700,0) in the Position X Y Z (mm) text
box and (0,0,90) in the Orientation (deg)
text boxes to define the location of the
conveyor.
Click OK to finish the adding of the con-
veyor.
On the ribbon-tab, click Conveyor under
Layout.
In the Conveyor window, enter "Linear1"
in the Conveyor Name text box.
In the Conveyor window, select the type
as "Linear" in the Conveyor Type drop-
down list.
© Copyright 2021 ABB. All rights reserved.
5 Production examples
Note/Illustration
xx1900000474
xx1900000475
xx1800000855
xx1900000476
Continues on next page
Continued
337