Replacing Frame Components; Removing The Front Panel; 10.1.1 Removing Front Panel Cartridges; Chapter 10, "Replacing Frame Components - Qualstar XLS Series Technical & Service Manual

10

Replacing Frame Components

This chapter provides instructions for the following tasks:
• Removing the front panel (see
• Replacing the front panel (see
• Removing and replacing the side panels (see
10.1

Removing the Front Panel

Procedure overview:
Step Description
1 Shut down the library and power it off
2 Remove front panel cartridges
3 Remove the air filter cover
4 Detach the cables
5 Remove the front panel from the frame
Table 10-1 Overview of removing the front panel
Required tools and equipment:
• #2 Phillips screwdriver
• Cable tie cutters

10.1.1 Removing Front Panel Cartridges

To remove the front panel cartridges, follow these steps:
1. Shut down the library and power it off. See
2. Open the door(s).
3. Reach behind the front panel and remove all cartridges from the fixed port
assemblies.
XLS Library Technical Service Manual
Section 10.1)
Section 10.2 on page
Table 10-1 provides an overview of removing the front panel.
Make sure you have the following:
10-7)
Section 10.3 on page
Refer to...
Section 6.2 on page 6-1
Section 10.1.1
Section 10.1.2 on page 10-3
Section 10.1.3 on page 10-4
Section 10.1.4 on page 10-5
Section 6.2 on page
10-11)
6-1.
10-1