Analog Audio Destination Port Properties Window; Device Properties Windows - Lightware UBEX-MMU-X200 User Manual

 
     
8. Software Control - Lightware Device Controller 8. Software Control - Lightware Device Controller
8.10.3. Analog Audio Destination Port Properties Window
Clicking on an analog audio destination port the properties panel opens on the right side. Clicking on the 
icon the properties section opens in new window.

Analog audio destination port properties window

The most important signal information is available on the panel.
Settings and Tools
▪ Stream naming;
▪ Enabled: when it is checked in, the stream is transmitted to the receiver; if it is not, the stream is muted.
▪ Disconnect stream: clicking on the button results the source stream is disconnected from the output
port.
▪ Tags: unique and configurable tags can be attached to the stream for the best identification. The tags
are searchable in the Search Field.
▪ Volume: sets the input volume (attenuation) between 0% (-95.62 dB) and 100% (0 dB). Clicking on the
icon results -1%, the icon results +1% in the volume setting. The default value is 100%.
 
▪ Balance: sets the balance between -100 (total left) and 100 (total right). Clicking on the
-1, the icon results +1 in the balance setting. The default value is 0 (center).

Mute: enable or disable the muting of the output port.
▪
▪ Dark mode: the dark mode feature can be enabled or disabled. It keeps the LCD screen and the LEDs
unlit to hide the device during the event when the settings is enabled.
▪ Identify unit: Clicking on the button makes the four front panel LEDs blink in green for 10 seconds. The
feature helps to identify the device itself in the rack shelf or on the desk.
▪ Device properties: Clicking on the button opens the properties windows of the endpoint device.
▪ Restart unit: clicking on the button makes rebooting the device (the same as disconnecting from the
power source and reconnecting again).
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
#analogaudio #volume #balance #gain
icon results

#mute #unmute
#darkmode #new
8.11. Device Properties Windows
Port Tiles
The port tiles and the colors of the displayed icons
represent different states and information.
1
Port name
2 Input / output port type indicator
HDMI input port
Local HDMI output port
HDMI output port (the signal
source is one of the input
streams)
HDMI output port (the signal
source is the copy of the
HDMI out 1)
Analog audio input port
Analog audio output port
Selected port indicator
3
If the frame is orange, the properties panel of
the port is displayed.
4
Port ID
5 Signal present indicator
If turquoise, signal is present, if grey, signal
is not present.
6 Resolution / refresh rate of the stream
96 96
7 Bandwidth of the stream
8
Embedded audio presence
Embedded audio is present.
Embedded audio is not present.
9
HDCP state
2.2 The signal is encrypted with
HDCP 2.2.
1.4 The signal is encrypted with
HDCP 1.4.
The sink device is not
compatible with the current
HDCP version.
Signal is not HDCP-encrypted.
q
+5V / Hotplug state
Source/sink is connected.
Source/sink is not connected.
w
Source multiplexer (MUX) selector
The selected source is the
Stream (coming from the
SFP+ ports).
The selected source is the
local HDMI input port.
The selected source is the
copy of the HDMI out 1 port.
Selectable source signal
Source multiplexer (MUX) expandable
e
menu
Clicking here results opening the MUX menu
with the selectable source signals of the
output port.