Hdcp Setting; Query The Source Mux Options - Lightware UBEX-MMU-X200 User Manual

 
     
9. Programmer's Reference 9. Programmer's Reference
9.10.22. HDCP Setting
HDCP capability can be set to Auto/Always on the output ports, thus, non-encrypted content can be
transmitted to a non-HDCP compliant display. See more information in the
Command and Response #hdcp #new
SET•/MEDIA/STREAMS/VIDEO/<out>/PORT.HdcpMode=<HDCP_mode>
ç
pw•/MEDIA/STREAMS/VIDEO/<out>/PORT.HdcpMode=<HDCP_mode>
æ
Parameters
Parameter Parameter description
<HDCP_mode> HDCP mode
Example
ç SET /MEDIA/STREAMS/VIDEO/D101/PORT.HdcpMode=Always
æ pw /MEDIA/STREAMS/VIDEO/D101/PORT.HdcpMode=Always
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
HDCP Management section.
Value Value description
The level of the HDCP-encryption
Auto
depends on the input.
The output ports set the maximum
Always HDCP-encryption level which can
accept by the connected sink device.
The output ports always force HDCP
2.2 Type 1. If the sink device supports
this HDCP-encryption level, the signal
will be encrypted with HDCP 2.2 Type
AlwaysType1
0/1. The signal will be encrypted with
HDCP 2.2 Type 1 when the source and the
sink either support this HDCP-encryption
level.
9.10.23. Query the Source MUX Options
The source multiplexer (Source MUX) makes available routing more different source signals to the HDMI
output ports. See more details about this function in the
The query responses the available source signals for the selected output port.
Command and Response #mux #sourcemux #new
ç GET•/MEDIA/STREAMS/VIDEO/<out>/PORT.SourceMuxOptions
pr•/MEDIA/STREAMS/VIDEO/<out>/PORT.SourceMuxOptions=<mux_options>
æ
Parameters
Parameter Parameter description
The availabe sources for
<mux_options>
the output port
Example
ç GET /MEDIA/STREAMS/VIDEO/D102/PORT.SourceMuxOptions
æ pr /MEDIA/STREAMS/VIDEO/D102/PORT.SourceMuxOptions=D2;I2;O1
Receiver Mode and the Transceiver Mode sections.
Value Value description
Only for HDMI out 1 port: the source stream
D1 coming from the connected remote device is
selectable for the output port.
Only for HDMI out 2 port: the source stream
D2 coming from the connected remote device is
selectable for the output port.
Only for HDMI out 1 port: the stream of the
I1 HDMI in 1 local input port is selectable for the
output port.
Only for HDMI out 2 port: the stream of the
I2 HDMI in 2 local input port is selectable for the
output port.
Only for HDMI out 2 port: The copy of the stream
O1
of HDMI out 1 is selectable for the output port.
152 152