Identify The Layout; Creating Zone - Lightware UBEX-MMU-X200 User Manual

 
     
9. Programmer's Reference 9. Programmer's Reference
9.11.35. Identify the Layout
Calling the method makes generating 10 test colors on the display devices for 10 seconds. The feature helps
to identify the layout physically.
Command and Response
ç CALL•/MEDIA/VIDEOWALLS/<video_wall_ID>/LAYOUTS/<layout_ID>:identifyLayout()
æ mO•/MEDIA/VIDEOWALLS/<video_wall_ID>/LAYOUTS/<layout_ID>:identifyLayout=
Example
ç CALL /MEDIA/VIDEOWALLS/VIDEOWALL1/LAYOUTS/LAYOUT1:identifyLayout()
æ mO /MEDIA/VIDEOWALLS/VIDEOWALL1/LAYOUTS/LAYOUT1:identifyLayout=
Explanation
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
9.11.36. Creating Zone
A layout can contain more zones where the displayed source stream are different.
Command and Response
ç CALL•/MEDIA/VIDEOWALLS/<video_wall_ID>/LAYOUTS/<layout_ID>:createZone(<zone_ID>;<display_ID>)
æ mO•/MEDIA/VIDEOWALLS/<video_wall_ID>/LAYOUTS/<layout_ID>:createZone=
Parameters
Parameter
<zone_ID>
<display_ID>
The following figure shows the values of the
Example
ç CALL /MEDIA/VIDEOWALLS/VIDEOWALL1/LAYOUTS/LAYOUT1:createZone(ZONE1;R1C1;R1C2;R1C3)
æ mO /MEDIA/VIDEOWALLS/VIDEOWALL1/LAYOUTS/LAYOUT1:createZone=
#zone
Description
The ID of the zone
The ID of the display device in the wall. R<row_number>C<column_number>
<display_ID> parameter in an 8x4 video wall.
161 161
Formula
ZONE<number>