Release Notes Of The Firmware Packages; Endpoint Series - Lightware UBEX-MMU-X200 User Manual

 
     
14. Appendix 14. Appendix
14.5. Release Notes of the Firmware Packages
14.5.1. Endpoint Series
Valid for the following models:
▪ UBEX-PRO20-HDMI-F100
▪ UBEX-PRO20-HDMI-F110
▪ UBEX-PRO20-HDMI-R100 series
v1.5.4b1
Release date: 2020-10-07
Bugfix:
▪ Fixed the video timing and audio bug.
v1.5.3b1
Release date: 2020-09-10
New feature:
▪ Added 3840x2400p60_reduced timing to scaler
Bugfix:
▪ Fixed a glitch with static IP settings storage
▪ Fixed the inconsistency of factory default network settings on RX devices
▪ Fixed a regression in EOL testing
v1.5.2b1
Release date: 2020-08-12
Bugfix:
▪ Fixed a compatibility issue with older LDU2 releases
▪ Fixed reliability problems with the HTTP server component
▪ Fixed an issue with pre-v1.4.0 migration support
▪ Fixed flash storage support that caused boot loops on some devices
v1.5.1b1
Release date: 2020-05-26
Bugfix:
▪ Fixed a bug with IR reception
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
v1.5.0b8
Release date: 2020-05-11
New feature:
▪ Source locked mode is now supported.
▪ Scaling and frame rate conversion are also supported on transmitter side.
▪ The frame rate converter and scaler modules support image cropping in case of downscaling in center
image position.
▪ 12-bit deep color HDMI signals can be transmitted in 10 bit mode.
▪ Extended Identify Me feature to RJ45 ports
▪ Added support for cropper on secodary video pipe
▪ Added Compatible property to SFP nodes
▪ Added home screen to LCD menu
▪ Added local input loopback and copy features to RX mode
▪ Added support for automatic video freeze on signal loss as a NoSync option
▪ Added copy feature to TRX mode
▪ Added support for manual video freeze
▪ Added support for Dark Mode
▪ Updated video processing latency calculations (fixes tearing and flickering issues in some setups)
▪ Added processing latency property to video pipes
▪ Added support for altering Color Range
▪ Added overall Health Status properties
Bugfix:
▪ SCDC registers are only modified, if the connected display supports this protocol.
▪ 4k60 resolution was not transmitted to displays, which were 4k60 capable, but did not report SCDC
capability in EDID, such as LG27UD58. Fixed.
▪ Fixed video tearing when converting between 60 and 24 Hz
▪ Fixed a glitch with EDID caching
▪ Fixed a glitch with HDMI outputs after operation mode change (TX/RX/TRX)
▪ Fixed a glitch with TMDS clocks between 310 and 340 MHz (e.g. 3440x1440p60)
▪ Fixed artifacts with video wall at 4K60
▪ Fixed HDMI audio node 'Connected' state
▪ Improved support for newer SFP+ standards (OM3/OM4 and copper lengths)
▪ Fixed a glitch that could cause an additional delay of one frame
234 234